Designer Transforms Old Steel Toolbox into Supreme Toolbox During Quarantine

Editor’s Note: This article was originally published on Imaginary Zebra and reposted with permission.

Albeit a quick one, this project wouldn’t have been completed without the shelter-in-place order since March. I’ve stayed home long enough to begin cleaning out the garage, a to-do item that I’ve put off since 2018. Sh*t was getting serious.

While throwing stuff away from my garage dump workshop, I found this worn metal box. It was covered in sawdust and speckles of paint. It was also missing a tray.

I’ve read enough Marie Kondo to only keep things that spark joy, so I was ready to toss this out.

But upon closer inspection, I saw a beautiful piece of hardware. It was a vintage Kennedy all-steel toolbox in red wrinkle. It had plated, though slightly rusted, locking clasp and a steel core handle.

Sexy little script of the brand.

So, I’ve come up with the idea. And it had got to do with all the red.

This project was a nod to the silver lining of shelter-in-place.

BEFORE:

Like with all refurb projects, we start with cleaning. It didn’t take much besides WD-40 and elbow grease. Water and shop cloth to clean off the dust and dirt. I used WD-40 and steel wool to get rid of the light rust and some of the white speckles.

The entire process took 30 minutes.

I worried that using stronger solution like acetone to take off the white paint would damage the original red coat. So I ended up using steel wool for the paint spots as well. While it was effective, the trade-off is the constant rubbing also smoothed out the textured surface.

BEFORE:

AFTER:

Not bad, yeah?

BEFORE:

AFTER:

The toolbox retained some of its “patina” over the years. I thought about touching it up with red paint to reinforce the clean look often accompanied by the Supreme brand, but eventually decided to keep as is. The weathered look is much more forgiving and certainly added more character to the box. Nevertheless, I’ve always admired makers that can create an as-issued look with gloss and pristine finishes.

This was the Kennedy K-19 tool box.

Post-measurement was to create the proper graphic for the toolbox.

Photoshop mockup.

I intentionally used the extra-large Supreme font, which is Futura heavy oblique with about -5 kerning, to cover the front side of the toolbox. The “S” that protruded out onto the lid makes the design more dynamic. I also liked how the locking hardware covered part of the texts, though this part turned out to be a nightmare to execute cleanly.

A simple way to figure out the correct measurement of the design for a flat object like this is by taking a straight front facing image of the object. Then calculate the proportion accordingly: I knew the box was 19 inches. The graphic was about 91.4% of the box. Hence, I needed a 17.3 inches wide “Supreme”.

I used the Silhouette Portrait decal cutter with Oracal 651 outdoor grade vinyl decal.

The texture surface was tough to adhere on. So after setting all the decal in place, I sprayed the entire box with a gloss clear coat to add an extra layer of protection and to help press the stickers in place.

Patience was key. Particularly when it comes to spray painting. Spray evenly and 8-12 inches away from the object. Multiple coats. I then sped things up with the blow dryer.

DONE.

The all steel Supreme toolbox:

BEFORE:

AFTER:

BEFORE:

AFTER:

Till next time.

About the Author: Benson Chou is a brand consultant and the founder of design studio Imaginary Zebra. You can find more of his work on his WebsiteInstagram, and Behance.

All Images via Benson Chou

The post Designer Transforms Old Steel Toolbox into Supreme Toolbox During Quarantine appeared first on NextShark.



Contributer : NextShark

Designer Transforms Old Steel Toolbox into Supreme Toolbox During Quarantine Designer Transforms Old Steel Toolbox into Supreme Toolbox During Quarantine Reviewed by mimisabreena on Wednesday, April 15, 2020 Rating: 5

No comments:

Sponsor

Powered by Blogger.